A Guide To Laying Karndean Flooring by Derek Rogers

Karndean flooring is fully synthetic vinyl flooring that is available in tile and plank sizes not sheets as other traditional types of vinyl do.



It will come in a variety of designs that mimic perfectly other traditional floor finishes like timber, stone, and slate. This type is an ideal solution for many who want to use a selected floor finish within an area where the actual product would be unsuitable including a timber floor in the bathroom for example.



It is very versatile as you possibly can laid over all floor surfaces, wood, tile, asphalt, concrete even existing vinyl. Pdf files are around for download that can advise you for the correct preparation of your floor (this is particularly useful for unusual subfloor materials for example asphalt as well as for new concrete floors that may still have high moisture content.)



kitchens Peabody MA This guide will discuss the principals involved in laying Karndean flooring on a subfloor of aged concrete, wood, vinyl etc. If you are going to put your Karndean flooring over a more unusual subfloor it's highly advisable which you consult tips for the specific preparation and adhesive requirements of one's subfloor.



Laying this kind of flooring is a pretty easy operation that's well within the ability of the common DIY person. As with any flooring installation, the correct preparation in the sub floor is crucial. You must make sure that your floor is clean, flat and level understanding that there are no lumps, bumps, and grit or sharp objects. Anything that is for the subfloor can have under the Karndean flooring and can cause damage. Floors which can be uneven is going to be highlighted by light entering through doors or windows.



Firstly prepare your subfloor, for timber floors it's advisable to lay plywood sheeting that is well fixed on the timber floor and contains the joints full of a fine finishing compound, concrete floors either can have plywood sheeting laid and secured to them or a superb screed can be applied to give a flat surface. (The screed is not going to totally level the outer lining however.)



Before you commence to get the Karndean tiles or planks allow them to acclimatise for the room not less than 24 hours. Unpack the flooring and then leave to sit inside the room - this will likely avoid the planks or tiles expanding or contracting after they have been laid.



Karndean supply several unique adhesives to suit the different subfloor materials, choose the best adhesive on your subfloor. Spread the adhesive to the floor using the trowel that comes attached towards the adhesive container. Ensure that you just spread the adhesive on a manageable area in order that it does not set off before you are actually able to put your tiles or planks.



Once you've laid the flooring roll and cross roll the entire floor using a 100lb roller. Check again by 50 % to 3 hours and reroll as appropriate (or if recommended for the adhesive container.) Do not walk on, wash or polish the floor for the amount of time recommended for that adhesive you used.



Kardean flooring can be a solution which gives you the look of timber, stone and other flooring materials but that will not warp, chip or perhaps affected by heat and humidity as the natural products may.





Derek Rogers is really a freelance writer who represents many UK businesses. For vinyl flooring, he recommends Completely Flooring, one in the UK's leading suppliers of Karndean Flooring: