Maldon Shot Blasting Powder Coating Ltd
This easy-to-use powder coating gun provides a finish that is tougher than conventional paint. Coat cars, trucks and airplane parts with even cover and easy clean up. Just fill the tool with any standard powder coating paint and you're ready to go. This powder coating system is ideal for any auto body shop or car hobbyist.
Priming With Powder! The legendary durability of powder-coated finishes is further enhanced with this epoxy-based powder primer. If corrosion resistance and adhesion are important to you, you'll want to use this primer under every opaque powder we sell. (Not for use under the High-Temp Powders or directly under translucent finishes). For best results apply to bare metal and place in preheated 400°F oven until flow out occurs. Do not cure beyond flow out as adhesion will be adversely affected. Remove from oven and allow to cool. Apply powder colour of choice and cure as normal.
Economics - The economic benefits of powder coating are numerous but the largest benefit has to do with efficiency and overspray. The average transfer efficiency of powder coating is 60-70% and any over spray is a solid and can be reclaimed and re-used netting virtually no wasted product. With liquid paint you have a transfer efficiency of 30-35%, roughly 50% of the product is evaporated and there is no possibility of reclaiming over spray. The base product for powder coating is also substantially cheaper than wet paint.
Website load time is an important factor, because Google is taking the site's loading speed into consideration in determining its ranking. Even though this will not have a big impact, it is still something we (webmasters) should really look into. The reason is pretty simple - the majority of visitors are usually in a rush and no one is fond of waiting half a century before the website finally loads its content or fails to load. At the last check on 2016-07-08, website load time was 1.49. The highest load time is 4.50, the lowest load time is 0.54, the average load time is 1.38.
I must say...if you want the work done right, NO MATTER WHAT...go here! Steve is a honest great guy that and he can work magic. He did my 3-piece wheels no problem and put them back together for me. The work he does is outstanding and he has an eye for what would look good on a car. He works with you, shows you ideas, etc. I could go on for days about the guy and his company. If you are in the market to powder coat wheels (or anything else) - I would stop by here first and last. I went to about 5 other places and none of them had the service, quality and prices that Steve had. He is my go-to guy now for anything powder coated.