「DIY Powder Coating W」の版間の差分

提供: 先週の結果分析
移動先: 案内、検索
(ページの作成:「Powder Coatings are based on polymer resin systems, combined with curatives, pigments, leveling agents, flow modifiers, and other additives. These ingredients are melted,...」)
 
細
 
1行目: 1行目:
−
Powder Coatings are based on polymer resin systems, combined with curatives, pigments, leveling agents, flow modifiers, and other additives. These ingredients are melted, mixed, cooled, and ground into a uniform powder. A spray gun is used to apply an electrostatic charge to the powder particles, which are then attracted to the grounded part. After the powder coating is applied, the parts must go through a curing oven. The heat causes the coating to bake to a fluid state that bonds the paint to the metal surface.<br><br>Powder coating protects the roughest toughest machinery as well as the household items you depend on daily. It provides a more durable finish than liquid paints can offer, while still providing an attractive finish. Powder coated products are more resistant to diminished coating quality as a result of impact, moisture, chemicals, ultraviolet light, heat and other extreme weather conditions. In turn, this reduces the risk of scratches, chipping, abrasions, corrosion, fading, and other wear issues. It's tough. It looks great. And it lasts a long time. In addition to being durable, powder coating is an attractive choice due to environmental advantages.<br><br>Beyond the cleanliness of the substrate, the two biggest threats to a perfect finish are ones that contamination-control professionals know well: temperature and humidity. Extreme swings in either, or both, of these variables can cause an [http://Www.travelwitheaseblog.com/?s=assortment assortment] of defects ranging from uneven coating to bumps or blemishes in the finish. In some industries, this can translate into a high loss of yield if a batch of product must be stripped and recoated because of obvious imperfections in the finish.<br><br>Stripping old paint or powdercoat is not limited to media blasting. For those who are on a budget there are chemical strippers that is used (RTFM) according to the directions work just fine. These contain a fraction of methlylene chloride. The so called safe strippers are sodium hydroxide (lye) and are not really great to begin with, do not work well at all at below 70F and will [http://www.recruitingblogs.com/main/search/search?q=pit%20aluminum pit aluminum] alloys. This included the professional strip shops. Hot lye (bye-bye) ! Some upscale shops use straight methylene chloride in a sealed vapor booth.<br><br>Powder coating is applied as a dry powder (polyester) and then cured in an oven. The part to be coated is grounded and the powder receives an electrostatic charge as it is sprayed and is attracted to ground. This keeps the coating in place until it is oven cured. Most painted metal products are currently powder coated. No hazardous waste is generated in the process. No solvents are used. <br><br>If you want to learn more information regarding Powder coating wielkopolska ([http://Www.biegpapiernika.pl/forum/profile.php?id=21628 http://Www.biegpapiernika.pl/forum/profile.php?Id=21628]) take a look at our site.
+
Powder coating is by far the youngest of the surface finishing techniques in common use today. It was first used in Australia about 1967.<br><br>The lug bolts are grade 8 and 3/8NF. For the rears, I plan to Loctite and will probably tack weld the bolt heads to the brake drum. This will prevent them backing out and spinning if I have to change a tire on the road. The wheel pilots on the same diameter as do the wood spokes. There are large hexagonal [http://Www.Google.Co.uk/search?hl=en&gl=us&tbm=nws&q=standoffs&gs_l=news standoffs] that locate to the machined back of the wheel. For the front hubs, I will use Ford hubcaps as grease seals undel the McLaren caps.<br><br>Now, suspend the masked/degreased receiver and end cap from an overhead support. I used 550 paracord as it is strong, cheap and available. Any support such as a broomstick, dowel rod, 2x4 lumber, etc. is OK. With the Hot Coat power unit plugged into a grounded 110V outlet, attach the ground clip to the receiver. I attached mine to the underside of the rear locking pin bushing.<br><br>Regional pick-up and delivery of customer parts is available. Great care is taken to ensure coated parts are properly protected during transport. As a trusted coating provider to the appliance, automotive, medical, and heavy equipment industries, we are also experienced in providing JIT shipping and Kanban management services. For more information about our [https://Twitter.com/search?q=electrostatic%20powder&src=typd electrostatic powder] coating services, see the table below, or contact us directly.<br><br>When only a custom look will do for your project or you need a specific color to represent your business, rely on Extreme Powder Coating for custom color powder coating in the greater Minneapolis, Minnesota area. We have the technology to create the exact color you need and the equipment to apply it in a smooth, even finish. Call today to learn more about our custom color powder coating services in Blooming Prairie, MN and the greater Minneapolis, MN area. <br><br>If you liked this article and you would like to obtain more facts pertaining to malarnia proszkowa poznan ([http://www.biegpapiernika.pl/forum/profile.php?id=21628 http://www.biegpapiernika.pl]) kindly browse through the site.

2016年7月27日 (水) 03:58時点における最新版

Powder coating is by far the youngest of the surface finishing techniques in common use today. It was first used in Australia about 1967.

The lug bolts are grade 8 and 3/8NF. For the rears, I plan to Loctite and will probably tack weld the bolt heads to the brake drum. This will prevent them backing out and spinning if I have to change a tire on the road. The wheel pilots on the same diameter as do the wood spokes. There are large hexagonal standoffs that locate to the machined back of the wheel. For the front hubs, I will use Ford hubcaps as grease seals undel the McLaren caps.

Now, suspend the masked/degreased receiver and end cap from an overhead support. I used 550 paracord as it is strong, cheap and available. Any support such as a broomstick, dowel rod, 2x4 lumber, etc. is OK. With the Hot Coat power unit plugged into a grounded 110V outlet, attach the ground clip to the receiver. I attached mine to the underside of the rear locking pin bushing.

Regional pick-up and delivery of customer parts is available. Great care is taken to ensure coated parts are properly protected during transport. As a trusted coating provider to the appliance, automotive, medical, and heavy equipment industries, we are also experienced in providing JIT shipping and Kanban management services. For more information about our electrostatic powder coating services, see the table below, or contact us directly.

When only a custom look will do for your project or you need a specific color to represent your business, rely on Extreme Powder Coating for custom color powder coating in the greater Minneapolis, Minnesota area. We have the technology to create the exact color you need and the equipment to apply it in a smooth, even finish. Call today to learn more about our custom color powder coating services in Blooming Prairie, MN and the greater Minneapolis, MN area.

If you liked this article and you would like to obtain more facts pertaining to malarnia proszkowa poznan (http://www.biegpapiernika.pl) kindly browse through the site.

「http://ittai.net/mw/index.php?title=DIY_Powder_Coating_W&oldid=268261」から取得