「A Guide To Laying Karndean Flooring by Derek Rogers」の版間の差分

2016年7月27日 (水) 23:06時点における最新版

Karndean flooring is fully synthetic vinyl flooring that also comes in tile and plank sizes not sheets as other traditional varieties of vinyl do.



It also comes in a variety of designs that mimic perfectly other traditional floor finishes including timber, stone, and slate. This type is a perfect solution for people who want to use a specific floor finish in an area when the actual product will be unsuitable like a timber floor in the bathroom as an example.



It is quite versatile as it can be laid total floor surfaces, wood, tile, asphalt, concrete even existing vinyl. Pdf files are for sale for download that may advise you around the correct preparation of the floor (almost all of the useful for unusual subfloor materials including asphalt and for new concrete floors which could still have high moisture content.)



This guide will discuss the general principals involved in laying Karndean flooring on a subfloor of aged concrete, wood, vinyl etc. If you are going to get your Karndean flooring over a more unusual subfloor it is highly advisable that you just consult helpful tips for the specific preparation and adhesive requirements of one's subfloor.



Laying this specific flooring is a pretty easy operation which is well within the ability of the typical DIY person. As with any flooring installation, the best preparation of the sub floor is crucial. You must keep your floor is clean, flat and level understanding that there are no lumps, bumps, and grit or kitchen design Boston MA sharp objects. Anything that is about the subfloor will show under the Karndean flooring and definately will cause damage. Floors that are uneven will probably be highlighted by light entering through doors or windows.



Firstly prepare your subfloor, for timber floors it really is advisable to put plywood sheeting that is well fixed towards the timber floor and it has the joints filled up with a fine finishing compound, concrete floors may either have plywood sheeting laid and secured for many years or an excellent screed can be applied to provide a flat surface. (The screed will not likely totally level the outer lining however.)



Before you commence to put the Karndean tiles or planks allow them to acclimatise to the room not less than 24 hours. Unpack the flooring and then leave to sit within the room - this will avoid the planks or tiles expanding or contracting once they have been laid.



Karndean supply a number of different adhesives to match the different subfloor materials, choose the correct adhesive to your subfloor. Spread the adhesive on top of the floor while using the trowel that comes attached for the adhesive container. Ensure that you just spread the adhesive with a manageable area in order that it does not set off before you are already able to get your tiles or planks.



Once you have laid the flooring roll and cross roll the entire floor having a 100lb roller. Check again by 50 % to 3 hours and reroll if needed (or if recommended around the adhesive container.) Do not walk on, wash or polish the floor for your amount of time recommended for your adhesive you used.



Kardean flooring can be a solution that offers you the look of timber, stone and other flooring materials but that will not likely warp, chip or be affected by heat and humidity because natural products may.





Derek Rogers is often a freelance writer who represents several UK businesses. For vinyl flooring, he recommends Completely Flooring, one with the UK's leading suppliers of Karndean Flooring: