「A Guide To Laying Karndean Flooring by Derek Rogers」の版間の差分

2016年7月27日 (水) 19:47時点における版

Karndean flooring is fully synthetic vinyl flooring that comes in tile and plank sizes not sheets as other traditional styles of vinyl do.



It will come in a variety of designs that mimic perfectly other traditional floor finishes for example timber, stone, and slate. This type is an ideal solution for many who want to use a particular floor finish in an area in which the actual product can be unsuitable such as a timber floor in a bathroom by way of example.



It is incredibly versatile as they can be laid over all floor surfaces, wood, tile, asphalt, concrete even existing vinyl. Pdf files are available for download that may advise you for the correct preparation of your respective floor (this is particularly useful for unusual subfloor materials including asphalt as well as new concrete floors that could still have high moisture content.)



This guide will discuss the general principals linked to laying Karndean flooring over a subfloor of aged concrete, wood, vinyl etc. If you are going to get your Karndean flooring on a more unusual subfloor it's highly advisable that you just consult helpful information for the specific preparation and adhesive requirements of one's subfloor.



Laying this kitchens Peabody MA specific flooring is a reasonably easy operation that's well within the ability of the average DIY person. As with any flooring installation, the right preparation of the sub floor is vital. You must keep your floor is clean, flat and level understanding that there are no lumps, bumps, and grit or sharp objects. Anything that is on the subfloor will demonstrate under the Karndean flooring and definately will cause damage. Floors that are uneven will likely be highlighted by light entering through doors or windows.



Firstly prepare your subfloor, for timber floors it's advisable to lay plywood sheeting that is certainly well fixed towards the timber floor and has the joints full of a fine finishing compound, concrete floors may either have plywood sheeting laid and secured for them or an excellent screed can be applied to give a flat surface. (The screed will not totally level the top however.)



Before you commence to get the Karndean tiles or planks permit them to acclimatise towards the room for around 24 hours. Unpack the flooring and leave to sit inside the room - this may avoid the planks or tiles expanding or contracting when they have been laid.



Karndean supply several unique adhesives to suit the different subfloor materials, choose the correct adhesive for the subfloor. Spread the adhesive onto the floor using the trowel that comes attached for the adhesive container. Ensure which you spread the adhesive over a manageable area to ensure it does not disappear before you are already able to put your tiles or planks.



Once you've got laid the flooring roll and cross roll the whole floor having a 100lb roller. Check again in 2 to 3 hours and reroll if necessary (or if recommended for the adhesive container.) Do not walk on, wash or polish the floor for that amount of time recommended for your adhesive you used.



Kardean flooring can be a solution which gives you the look of timber, stone and other flooring materials but that will not likely warp, chip or perhaps be affected by heat and humidity as the natural products may.





Derek Rogers can be a freelance writer who represents several UK businesses. For vinyl flooring, he recommends Completely Flooring, one of the UK's leading suppliers of Karndean Flooring: