利用者:Icecuber2854

Stage one one Prior to you get started tearing your Whirlpool fridge apart, verify to be sure that the glaciers maker motor is the problem. To start with test out the plastic consuming water provide tubing to see if water gets to the glaciers ice maker commercial maker. Then make sure other components from the fridge are getting power. Perform the lights come on when you open up the door? If these things seem to be working, possibly the snow maker could be the culprit.

Stage two 2 HOLD IT! Ahead of you start off pulling aspects apart think about possessing some photos from the snow maker motor set up. Will not fail to remember you want to place the thing back collectively. I consider benefit of my cellphone mainly because of this.

Phase 3 three Hang on once a lot more! Please phase from the snow maker! Long loads of to turn away from the power and the water anyway. You likely never have to turn both of these off nonetheless in an article like this I'm intended be accountable and tell you to do it.

Stage four O. k., go on and rip involved with it. To start with eliminate the plastic guard on front side from the module. Lightly pull the whitened plastic gear wheel by way of the axle on primary of the electric motor assembly. Then use your screwdriver to take away the screws in the corners from the ice maker motor assembly.

Phase 5 Clear away the screws that have the engine assembly to the inside wall from the fridge. Then pull the electrical motor assembly far sufficiently from the wall to expose and disconnect the power provide wiring funnel privately of the snow maker. Now the electrical motor assembly need to be detached. Now you are ready to take the electric motor assembly to the elements store showing the associate the exact element you want for the Whirlpool fridge. Or you can constantly order it from eBay and wait for it to be sent to your house.

Phase six Reconnect the electrical power supply wiring harness to the brand new motor module. Location the screws back in put on the corners of the engine assembly. Slide the new gear wheel onto the shaft. Reattach the assembly to the within wall of the refrigerator. Place the guard back yet home ice machine again on and flip the water and strength on. If all the things is doing work correctly, you really should be capable to see and/or hear the glaciers maker commence to fill with water.